Steps For 123 HP OJ 6950 Printer Setup

HP printers are well known for their prints and their printing quality. In this guide, we will be discussing the steps for the 123 hp oj 6950 printers. As HP OfficeJet 6950 printer is broadly utilized by users nowadays. It comes with very thrilling functions like it prints pages in a minute and it comes with a touch screen.

So in this guide, we will be explaining the steps for the 123 hp 6950 setup with the installation procedure. Well if you are also wondering to setup then this guide will help you out.

Basic Setup

To begin with, set up you need to take off all the tape and packing materials.

The sticker at the printer control panel display has to be eliminated.

Using the slot at the left side of the printer, pull open the ink cartridge to get entry to the door.

The next step for the 123 hp com oj6950 setup is you need to remove any tape or packing cloth found internal your printer.

The cartridge gets right of entry to door must be closed around it.

The printer’s rear needs to be going through you.

With the rollers going through the printer, the duplexer needs to be placed in the slot at the printer’s rear. Then push it inside till it locks into the area.

It is optionally available and does not deliver with all printers. If you don’t have this accent, then you can bypass this step.

Take Tray 2 from the box, cast off all of the packing fabric and tapes from the box and the tray.

The tray must be positioned on the floor where you may be the usage of the printer for the 123 hp com oj6950 setup.

The printer has to be lifted & held over and above the paper tray.

The power cable needs to be linked to the printer’s rear. The other give-up needs to be inserted into a strength outlet.

The HP Officejet 6950 Printer must be switched on.

Now you are all done with the procedure of the 123 hp com oj6950 setup.
Installing the Ink Cartridges

Using the slot on the left facet of the printer, pull open the ink cartridge to get entry to the door.

The printer needs to remain silent and idle before you continue to the following step for

The HP 6950 ink cartridge must be eliminated from its cartridge.

Holding the cartridges on the perimeters with the nozzles going through the printer, the ink cartridge should be placed in its slot. Then push it forward so that it locks into the vicinity.

Carry out those steps for all the new ink cartridges for

The ink cartridge gets admission to doors needs to then be closed.

Please wait because the printer wishes to align the ink cartridges. Once the alignment is finished, the printer will print an alignment page.


We believe that now you are able to do the setup for as explained. If still, you are not able to do it then you can contact our experts as they will assist you with 24*7 assistance.
  • 0
  • avatar
  • Merlin
  • 17 апреля 2021, 14:14